Bonsai with moss for wall (60cm!)

This is a remix of mishkin2 bonsai wall art. The top of the tree has been slightly modified to create more space for moss, the object has been enlarged to 60 cm (24 in), my click connection system and drill holes have been added.

The Bonsai has a diameter of 60 cm (~ 24 in) and a depth of 1 cm (0.39 in). Divided into 13 parts so that you can print it yourself on larger printers. Clipping together with printed connectors (34 pieces are needed). The total printing time is over 70 hours!

There are 3 holes for 4.5mm and 3 holes for 4.0mm screws for wall mounting. 2-3 screws are sufficient.

Mounting - Alignment: It makes sense to hold the object (with or without moss) against the wall and only drill 1 hole at first. Then use a spirit level to check that the surface of the water (the only straight line on the object) is level, mark and drill the other 2 holes.

Attention: Please check the individual parts first to see if they fit on your printer! The largest piece (part 2) measures 233 x 239 mm.