December 7, 2023
Description
This is a case for fingerprint sensor used with arduino or raspberry pi.
It was made on Fusion360 and It was splitted into 3 pieces:
You need to glue the cover sensor to the lid.
This case is super strong and it uses six M3 screws (4 screws for lid and 2 screws to hold case).
It was printed using a 0.8mm nozzle and with a layer heigth of 0.2mm.
Recommended infill: 25%
You can print with a 0.4mm too, but it will take more time to print.
Don't change object orientation to print it. This one is the best.
Only Top-Case.stl requires support, others are support free.
License:
Creative Commons - Attribution - Share Alike
lakemast
