Electric Longboard enclosure for Loaded Vangaurd

Hi Everone! I designed these 3D printable enclosure for the loaded vangaurd in Fusion 360.

This enclosure holds a 12s4p double stack 18650 battery configuration. It was mainly designed around the 38 inch model but it will fit the 42inch model just fine aswell (the images below shows the enclosure with the 42 inch model)!

It will NOT be able to fit 21700 as it is a little too narrow for them.

the ESC enclosure can fit a 100mm x 65 mm x 25mm esc very comfortably (should fit the makerx DV6S nicely) with enough space to maybe even fit an anti spark switch. In the picture below you will be able to see the esc enclosure with cuboid with a sive of 100mm×65mmx25mm.

the holes in the enclosures fit M6 bolts and the concave of the enclosures should fit the boards concave just right.

I recommend printing the enclosure with PETG, or ABS as they are more durable than PLA fillaments but also PLA should be fine. The wall thickness of the enclosures is about 3mm.

In the pictures above you can see I already printed these enclosures. the battery enclosure can be printed in one go on a printer with atleast a 300 x 300 mm plate such as the Artilery sidewinder X2 which is the printer I used.

The STL files are at the right scale to fit the vangaurd.

Hope you guys enjoy it!