Ritchey Chretien RC10 ZWO EAF Adapter Bracket

This adapter mounts a ZWO EAF onto the focuser of an RC10 made by GSO and is available under many different labels. It is designed to fit a focuser that is 110mm in diameter (I have another version available for the RC6 and RC8).

You will need to remove the large focuser knob from the focuser (side opposite the dual speed knob).

Extras you will need:

2x M5 nut

2x M5 cap screw (25mm length)

Should print in PETG or something with a higher glass transition point than PLA. I've found PLA can start to soften and deform if items are left in a vehicle in the summer. PLA has a glass transition point of about 140F

(Thanks to SBeersAP for test fitting the bracket on her RC10)