Elegoo Neptune N4Max Cable Chain

---

10 Jan '24: NEW UPDATE.
The Z-Mount_Chain has been modified to definitively resolve the problem with the Head Chain hitting the Z Mount piece. If you printed the previous version and you have no issues, there is no need to download this new version.

---

---

07 Jan '24: UPDATE.
The Head Chain has been revisited to make it a few millimeters more "slim", to avoid hitting the zmount bar when homing. If you printed the previous version and you have no issues, there is no need to download this new version.

---

If you want to protect the long cables of your Elegoo Neptune 4 Max and prevent them from hindering your prints, tangling on them or hooking objects while the extruder head moves, this is the perfect accessory for you (and for your printer).

There are many cable chains available on the web, but (at the moment) this is the only one that really fits the Elegoo Neptune 4 Max.
Designed appositely for the N4Max (remixing an existing project for the N4plus), you won't loose any millimetre in any of the Z and X axis, being able to use the full 42x42x48 cm size of this fantastic printer.

For my N4Max I used 27 Clip_and_Chain pieces for the Head cable and 39 Clips_and_Chain pieces for the part of the cable that from the base goest to the left Z motor.

Remove the original clip that keeps the cable on the printer base, and replace it with the Base_for_Chain_Clip along with the Clip_for_Base, using the Bigger_Clip to help the cable to stay in its position.

The Chain_Holder will only help the chain not to hang down when the head is close to the bed, and need to be inserted on the left side of the base.

The Zmount_Chain will be kept in its position using the original screw that Elegoo provides for the original cable holder.

The Head_Chain replaces the original cable holder that goes on the extruder head.

To print the Zmount_Chain and the Head_Chain, you need to use supports (and I recommend walls at least 1,6 mm thick.