January 7, 2024
Description
Print the body in PETG or Nylon or any fuel resistant material. Use a fuel resistant adhesive to connect the halfs of the gas tank(Or melted together). Cap should be printed in TPU. Make sure the tank inside is free of plastic particles.
Hole distance is 64mm, hold aprox 88cc of fuel. 40mm wide not including the flange.
The hole on the gas tank is for the fuel line. It should slide in all the way to the bottom 1mm gap approx. Exhaust line fits into the cap and should not be touching the fuel at rest.
Print and use at your own risk.
License:
Creative Commons - Attribution - Share Alike
CheapAzHobbies
