30x30mm filament reference chip and box for 25 or 50 - Ideal for Hueforge and ColorReader libraries

This suite of is designed to simplify building a filament library, either for colour reference, or for scanning using the ColorReader photospectrometer, which will tell you the precise RGB, CMYK or Hex colour values of the scanned colour, which is ideal for building a library for HueForge.

It comprises a 30x30x2.5mm chip that uses precisely 1 meter of filament and takes about 6 minutes to print.

I have also included two boxes; one that holds 50 chips, and the other holds 25. The Words "Filament Colour Samples" are embossed on the front of the lid.

The lid slides closed for safe storage, and the chips are separated from each other in the half height base for easy removal.

I printed the photo samples using Bambu matte on the Carbon X1, but they should be fine with any printer.

A textured plate will make the boxes more visually pleasing, but you can use a smooth one.

The 50 chip box measures 21x4cm (8.25x1.5 inches).
The 25 chip box measures 10,5x4cm (4.1x1.25 inches)