Last updates: 6/30/2015
This thing contains Captain/FO Efis (Electronic flight instrument system) panel and very experimental MCP (Mode Control Panel) for DIY simulator making.
EFIS:
- EFIS panel (both captain and F/O are same)
- Parts: push button knobs and holder for push buttons (take a look at the pictures)
- Fitting push buttons = 6x6x5mm
- Recommended IO device is BBI-32 or BU0836x from Leo Bodnar
- Use hot glue to connect push buttons to holder and holder to the panel.
- Recommended knobs for this EFIS http://www.thingiverse.com/thing:851918
MCP was never completed so I don't recommend to build one. There's no buttons for it.
MCP:
- W_MCP parts are meant to be printed with White filament
- G_MCP parts are meant to be printed with Gray filament
- Use glue or any other method to connect MCP parts together
- I have not tested or build MCP because I bought MCP from OpenCockpits for my sim (only part I bought ready made)
Following website is dedicated to this project: http://martin737.nitramite.com/
norkator
