Flexible Drawer-Divider-System

This drawer system consists of specially designed profiles that can be combined with each other as desired.
The height and distances are flexibly scalable in the slicer, which allows for any desired height and separation.
The dividers are designed at 4mm and can be printed or made from plywood.

For assembly if necessary, all profiles have a 3.5mm hole to cut M4 threads. This allows you to screw it to the bottom of the drawer.

• The profiles must be scaled to the desired Z-height
• The partitions to the desired X-width and Z-height

I printed it with 4 outer shells, which is already very stable.