Motherboard air intake Mega-S

Motherboard's air intake. I added it for improve drivers and mosfets cooling. I've replaced the original drivers 40 mm fan with 70 mm fan placed almost in the same position.

You need to make a Ø40 mm hole on the bottom panel approximately between the drivers and the mosfets (see my other remixed project). Then you have to do no. 3 holes of Ø4 mm. The first hole is approximately 15 mm and 66 mm from the foot (see image between the files) then the other holes are made with the center distance of the fan you will mount.

nb. You need to print 3 spacers