• Models
  • Contests
  • Slicer
  • Login
  • Start Here
    thingiverse-iconprintables-iconcults3d-iconmakerworld-iconmyminifactory-icon

    3D GO

    3D ModelsContestsCollectionsSaved ModelsOn a mobile device?

3D GO

Privacy Policy
Solid State Relay Box 3D Printer File Image 1
Solid State Relay Box 3D Printer File Image 2
Solid State Relay Box 3D Printer File Image 3
Solid State Relay Box 3D Printer File Thumbnail 1
Solid State Relay Box 3D Printer File Thumbnail 2
Solid State Relay Box 3D Printer File Thumbnail 3

Solid State Relay Box

3DInAZ avatar3DInAZ

January 26, 2024

thingiverse-icon
DescriptionCommentsTags

Description

This is a solid state relay box for controlling a 120v load. I presume it will work for 240v too but don't have a way to check this. AC connections are set up around C14 male and female plugs with screw mount sockets. Some parts were purchased from a local supplier and some from Amazon.

Space is included for a 12v power supply board to run a 40mm fan to cool the SSR attached to a heat sink. The control connection is made using a JST connector l soldered breadboard. I used a 2 position JST connector but left enough room for a 4 position connector so you can bring 12v from your power supply if you don't want to use a power supply in the box.

I bought my SSR locally but still used Kapton tape to put a thermal cutoff on the SSR in case it overheats. I used Wago lever nuts to make internal AC connections but wire nuts would work ok too.

It sounds like SSR's fail on so be sure to use appropriate safety controls on the load. In my case, it was another thermal cutoff as its running my heated bed. If, like me, you're not very familiar with SSR's, I noticed there are a couple different types and they don't all work well for all load types. So do your homework.

After printing mine a made a few minor changes but did not reprint.

Materials list

*12v 1A power supply. 24x60 mm spacing. I used computer standoff to lift this a bit. You will need to bend spade connectors on c14 female socket to get this to fit well.
https://www.amazon.com/dp/B07PG6B6N4

*Heat sink SSR spacing 68mm. https://www.amazon.com/dp/B08HQQCDY1

*Bread board Hole spacing 1 1/8" x 1 3/8". Purchased locally, this might be a bit hard to match. I used a couple of extra nuts on the mounting screws to act as standoff.

*C14 female connector 40mm hole spacing. Purchased locally but I think its fairly standard. https://www.amazon.com/dp/B0147XUWYO

*C14 fused and switched male connector 40mm hole spacing. There is another form factor that has the holes on the top and bottom. Make sure you get the one with holes on the side. https://www.amazon.com/dp/B00NWLE4U6

License:

Creative Commons - Attribution - Share Alike

Related Models

gyroscopic relaxing keyring - 6 rings preview image

gyroscopic relaxing keyring - 6 rings

gianfranco profile image

gianfranco

15,559

NSK-X Foam Dart Blaster preview image

NSK-X Foam Dart Blaster

Brooklyn Tony profile image

Brooklyn Tony

985

Customizable Track & Field Bag Tag / Keychain preview image

Customizable Track & Field Bag Tag / Keychain

HoneyBadger TeamTags profile image

HoneyBadger TeamTags

39

Red-Eyed Crocodile Skink - Articulated preview image

Red-Eyed Crocodile Skink - Articulated

Trejager profile image

Trejager

11,589

CHAMPIONS LEAGUE preview image

CHAMPIONS LEAGUE

Gian Carlo profile image

Gian Carlo

151

Etichetta Emergenza collare pulsante emergenza preview image

Etichetta Emergenza collare pulsante emergenza

DaLu_3D profile image

DaLu_3D

16

Red-Eyed Crocodile Skink - Articulated - Reuploaded preview image

Red-Eyed Crocodile Skink - Articulated - Reuploaded

Trejager profile image

Trejager

9,841

Mass Effect Normandy SR-2 Manget preview image

Mass Effect Normandy SR-2 Manget

Marcin Mączewski profile image

Marcin Mączewski

45