Cable Spender, Fast Print with Spool

Hey there,

https://www.printables.com/de/model/739107-cable-organiser-fast-print-cable-spender-incl-spoo

i made a fast little design for organising my loose Cables.
It is Fast print, no screws no nothing, just a little bit of glue for the spools.

Capacity of the Rolls is around 10-12meters (0,14 mm²)

For spooling i designed a little adapter to fit into a normal screwdriver/powertool.

Adapter Rod & Adapter Nut
(I recommend to print those with 100% infill)

HCW Honeycombwall Shelf Remix as a side bonus: see here

Guide:

Print 2 Spool Sides and 1 Spool S and glue them together. (If you have elefantfoots on your print you might need to work a bit on it)

Attach the Cable in the little hole ( if it doesnt fit. you can easily open it wider with a screwdriver or scissors)

Print the Adapter Rod and Adapter Nut and put a Spool onto it and screw it tight

Put onto the powertool and then have fun spooling.

Put the Spool into the Bottom, the wire trough the hole and slide the Top over it and you are finished

(Made this to be a fast printing organizing helper with not much hesitation.)
Feel free to remix, i have some upgrade ideas like magnets in the shelf and the spoolboxes.
Or more different sizes for more and bigger wire.