January 30, 2024
Description
my latest attempt at 3d printed boost, this time it looks like this should work .
this version has no machining other than drilling and tapping holes . this is the first prototype of this design and will have an updated version in the future ,
successfully produced boost on a gx200 for a short period of time
a larger than stock carb required when using a draw through system .( I haven't figured out exactly what carb yet)
rotors may require fitting to each other take material from the middle of the rotors not the outer edge .
requires 6x 608 bearings
m4x16 (12pc)main body( inner set requires 16mm outer can be longer)
m4x8(8pc)bearing cover
m4x20 (4pc)shaft cross bolts
m4x12(12pc) port adapter
some 8mm shafting or tubing 3pc ( 2pc 103mm) (1pc 60mm or to fit your needs )
.
4560 stands for 45mm x 60mm rotors
currently using strait rotors .
YouTube video : https://youtu.be/kyWpu84BoUI
update : repaired flange parallel issue on carb adapter
License:
Creative Commons - Attribution - Share Alike
turboprint3D
