Sewing Needle Holder (Singer)

by Segasonicfan Designs
https://segasonicfan.wixsite.com/retro

@SegasonicfanDesigns on youtube:
https://www.youtube.com/@SegasonicfanDesigns

If you use this model, please give at least a heart - it makes me happy!

Designed for Singer sewing needles. Should fit others I think.

There are 3 parts here, and you can print them all together at once :) no supports needed.
smooth flat PEI build plate if you want to match the look here.
Note: the white image is a slightly older version, it has been improved in the pink (current) v1.1

Make sure your printer is dimensionally accurate - this helps alot.

The thin cover (C) snaps onto the 4x nubs of the main holder piece (A). Then you can melt the nubs if you like for a more permanent assembly (squish them with a soldering iron). Make sure the holes are aligned when you press (C) onto (A). Its a snug fit.

(B) is the cover top, which snuggly fits into place to keep the needles from falling out :)

PLA settings used for my Ender 3 S1 Pro:

Temp: 205mm/s / 65mm/s

Speed: 50mm/s (initial layer: 30mm/s)

Retract: 0.8mm / 50mm/s

Infill: 20%

Supports: No

Skirt