Lee Factory Crimp Die Box

The box that the Lee Factory Crimp Die came in is great, until you put a quick-change adapter on it, at which point it does not close.

This is a replacement box that should fit it with both the Hornady or Lee lock rings and quick change adapters. The clasps don't work too great, but they'll do the job and it's good enough that I'm not going to spend time to make it better.

These were designed for the 357/38spl die. I'm not sure how Lee's other caliber crimpers compare in size, but I included a set of 3mf files that don't say 357/38.

Recommended print orientation included in pics. No supports needed. I did 3 walls, 4 top layers, 15% infill.

I made a hole through the bottom part that you can roll your instructions up to stash in there if you please.

Note: this was designed around the plate thickness of a hornady LNL progressive press. I included the fusion 360 design file in case you need to make an adjustment.