Summary

Disassemble the headphone bracket, making sure that the moving parts remain intact. Unsolder the left speaker. Unthread the cable and thread the two side parts (orange) onto the cable. (right part from below and left from the side) Mount and solder to the speaker with a metal pin or screw (1.5x15mm). The rest speaks for itself. To connect the side panels to the base plate, use an M5x15 screw with a washer. The original cable should be enough to be routed to the back of the S3 Pro. I also shortened the incoming cable and thus removed the microphone. The sound is definitely a lot better.

Print Settings

Printer Brand:

TEVO

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Tarantula Pro</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0,6 nozzle @0,72 3xperimeter</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>33</p></div></p>                                                    <strong>Filament:</strong> Eco PLA PLA                Transparent                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>none</p></div>

BoboVr S3 Pro - JBL Tune 500 - Mount

BoboVr S3 Pro - JBL Tune 500 - Mount

Related Models