Money Bin Bank

I added a rim to connect the cap so it can be removed. I increased the size of the spire to be stronger and reworked the tower for easier printing. I also added supports to the dollar signs that will need to be snipped off after printing. The dollarsign wall was recut to be flush with the modified tower.

It's printed in three parts. The tower, dollar sign wall, and the cap. I used M600 on the cap to swap colors from red to yellow before printing of the spire. The dollar sign wall is attached with superglue.

Update: I increased the size of the slot to support GBP and tightened up the locking mechanism on the cap and tower. I also modified the support on the wall for better success in printing.
I also uploaded an stl showing what the inside looks like, it's for reference and is not meant to be printed.