Planer Board (OffShore, Church Tackle, Ninja) & Dipsy Diver Storage System (Version 2)

This work is under CC-BY-ND-NC

New files have been updated:
Please align them in your CAD software or Slicer to ensure you have the correct configuration and that the screw holes and bottom slot align properly. You should pick 2 end pieces and 2 side pieces

I have made another box-style system specifically for the "OffShore" brand and the Dipsy Diver. If you are just looking for a side mount style, just check the files. Although, the only difference would be the slot in the back.

Update!

I have updated the files for the Planer Board (Offshore) and the Dipsy Diver (#1 Size). I have also added a Modular box that can be swapped out for the Dipsy Diver Side (I have not printed the Modular Box yet. I plan to do so soon and I will add pictures and updates if necessary.

Added: Church Tackle Walleye Board and Ninja Speed planer boards as well.

These have all been printed and tested.

Please Follow, Share, Post a Make, and send me a message with ideas for this system!

Metal Size is 16G Steel (Menards)

Click here for a full explanation --->

https://www.youtube.com/watch?v=IcLUX2eQHZs

https://youtu.be/t8znEcHI3ew <----- New version

https://youtu.be/Pl56D08gUu0 <----- Leader box

Update 4.21

I am currently printing the end box with the leader holder. I had a mistake in the design (the correct one is uploaded). Everything is confirmed working. 16ga steel fits very snuggly. I used a razor blade to clean out the channel and a rubber mallet to set the steel. It fits nicely. I think next time I will try a piece of aluminum.

On the leader holder card, I glued a piece of foam board to each side of it so I would have something to attach my leaders to. I will upload pictures soon!

Check out my other fishing Creations!

Garmin Echomap 4" Slide Cover
https://www.thingiverse.com/thing:6401316

Striker 4 Slide Case-
https://www.thingiverse.com/thing:4355677

Planer Board Storage System-
https://www.thingiverse.com/thing:6004432

Dipsy Diver Holder-
https://www.thingiverse.com/thing:5989727

Star Port Mount-
https://www.thingiverse.com/thing:4332777

Kayak Cupholder/ Rod Holder-
https://www.thingiverse.com/thing:4332777

Garmin Striker 4 Plus Mount with Transducer Mount To Fishing Kayak and Using a Jump Starter for Power-
https://www.thingiverse.com/thing:4082316

If you would like one but don't have a 3D printer please let me know I would be happy to help you out!

This work is under CC-BY-ND-NC