ARRMA Infraction 6s Body Post Mod For "Quick Latch Hood Pins"

Update 06/30/2025:
Paint Job and lights

Update 06/20/2024:
Taking sparky-john's suggestion and change the rear body mount so you can access the other two shock holes.
Added the following new .stl's:

Front_body_post_mount_new_no_alignment_countersunk_ v4.stl

Rear_body_post_mount _ no alingment_v3.stl
Rear_body_post_mount_no alingment_countersunk v3.stl
Rear_body_post_V2.2a_right_v5.stl
Rear_body_post_V2.2a_left_v3.stl

Note:
I Started with a Limitless V2 Roller and coverted it to an Infraction 6s so I could mount a BittyDesign ARES-1 body.

I like the Idea of the "Quick Latch Hood Pin" holding the body to the chassis.
Need to modify the body post mounts as these quick latch hood pins and ARES-1 body could not use the stock mounts.

Besides the printed parts you'll need the following:

BittyDesign ARES-1 1/7 Scale or simular body type.
4 pcs. of 22MM Quick Latch Hood Pins or equivalent.
4pcs. of M3 heat inserts McMaster-Carr or equivalent
6pcs. M3 x 8mm socket head screws