Gol D Roger - One Piece - with frame

Kudos to @Mathoose, which made the original model.

This remix adds a frame which you can use for Roger's picture.

Printer:

• Ender 3 v3 SE
• PEI textured bed

Printing instructions for the picture:

• 100% infill
• layer height of 0.08mm
• base layer of 0.16mm

Swap Instructions:

• Start with a black filament
• at layer #5 (0.48mm) swap to Gray
• at layer #11 (0.96mm) swap to White

Printing instructions for the picture:

• 20% infill
• layer height of 0.2mm

I used SketchUp to make this model. Meaning the model is hollow and Cura highlights the top layer in red since it has no support. But after you slice it, you will see that there's nothing wrong with the layers. The infills do support the top layer just fine.