Doggy Tape Dispenser

Dispenser for 50 mm packaging tape (up to 120 mm diameter) or any other tape under that range of dimensions.

Model TD1 is prepared to fit a steel blade-saw like https://www.amazon.es/gp/product/B0CD8YWD2Q/ref=ox_sc_saved_image_1?smid=AHP4NSCWH5R9U&psc=1

Model TD2 is prepared to receive a printed blade-saw made of PLA. Print this part in 0.12mm layer (PLA blade can be glued or screwed)

You will just need a screw (WS) 3,5 x 25 mm for the movable lid and 2 short screws 3,5 x 10 mm for the blade (better if you cut these two screws shorter to 7 or 8 mm).

Tape dispenser body is ready to be printed together with the rod (you’ll have to remove the support between the body and the rod, but it’s quite easy)