Wowgo 2s Pro/Max Nose Guard: Low Profile

Protect your board with this simple low-profile nose guard for the Wowgo 2s Pro/Max electric longboard. I originally tried to design it so that it could clip on to the truck base but couldn't make it work. So ultimately, I thought it would just be easier to stick it to the nose using command strips (I'll put an amazon link below). Command strips work really well to get the nose guard to stick on and it stays on even when riding on rough roads. It can also be removed (with some force) without damaging the nose. So for me, it works well. We have four Wowgo 2s Max's in our family and I put them on all the boards.

This does need supports to print. I printed my with paint-on supports in PrusaSlicer. I also changed the type to "Rectilinear Grid" pattern which made them easy to remove.

Last thing, if you can, print this in PETG, ABS, or ASA. I'm not sure how well PLA would survive outside in the sun. It could get brittle over time. But if you only have PLA, printing in PLA is better than having no nose guards for your board.

Example of command strips:
https://a.co/d/ef4XthX