Mirka Systainer Organizer - Stackable sanding disk (150mm) + base plate

A set of elements to organize your Mirka Deros Systainer :

1. The "Mirka offset plate" file is created to offset the sander. It allows to keep the power cord and the dust hose adaptor on while in the systainer. It also keep the little wrench from moving around !

2. The "Mirka Sanding organizer" has to be printed like this :

• 1 x Plate (prints flat, no need for supports)
• 3 x knob (to glue on the plate)
• 4 x Sandpaper trays of your choosing (you can also modify the grit number in the f3d file in the sketch named "Grit number")

When the plate and 4 trays are installed, it mesures exactly the inside height of the Mirka systainer! So when the box is closed, you can hold it in any orientation, nothing will move around inside!

It all prints without the need for supports.

All models can be modified with the Fusion 360 files or the STEP files.
If you don't have fusion 360 or have a suggestion, don't hesitate to ask.