Dewalt Deep Pro Drawer Slide Adapters

I was inspired by Adam Savage's wall of Sortimo organizers and was about to purchase about $1000 worth when I found I was unable to without choosing Mr or Ms which struck me as unnecessary gatekeeping.

So anyway…

These fit into the sides of a Dewalt Deep Pro 10-Compartment small parts organizer and screw to 14" drawer slides with the screws included in the drawer slide kit. The STL file contains both right and left sides, labeled for your convenience.

The middle two posts handle a lot of torque and are brittle at the base, so I printed it with 3 perimeters and 30% gyroid infill. Your milage may vary. The end two posts also reduce the torque at the center.

• Width of organizer with adapters: 17 3/4"
• Internal width of cabinet to contain organizers: 18 7/8"
• Vertical positioning of drawer slides in cabinet: 2 1/4" from base, then 4 3/4" apart gives 1/8" separation.
• Leave an extra 1/8 to 1/4" space at the top in a cabinet to allow the top organizer to drop in and come out.