Holder for WLtoys 1:28 cars

Holder for WLtoys 1:28 cars that grabs on to the chassis plate of the car.
Push the slider in to open the clamps and unlock the car.
There are two mounting holes for M3 cylinder head screws.

you need:
8x M2 Nut
8x M2x6
1x Ext. 3/16"x1-3/4" Spring (cut in 2 halfs)

Assembly:
Halve the tension spring in the middle and form new eyelets. Adjust the spring length so that the spring is still slightly tensioned even with the smallest slider distance!

Place slider in cover. (possibly lubricate with petroleum gelly)

Pull the eyelets of the tension spring over the pins of the clamps and place them on the slider.

Fix the whole thing with the holder and screw it together with M2x6.

Holders (L/R 1-3) can be glued into position with 1.75mm filament using the holes.