6 Inch Table

Just a simple table to stand a monitor or some decor onto.

I actually made this for my work as my Boss needed something to prop his monitors up onto.

You can easily use orca slicer to add some text or a logo to the table to help personalize it.

I thought I would share it since I have gotten a little behind on my uploads. And thought i might as well share it.

Like everything else I make. This was made in onshape. Its a rather simple design but maybe someone else will get some use out of it.

https://cad.onshape.com/documents/6eb4cda3f02dc48ec5a3ecf8/w/039944ae5c1f57823a5d0efe/e/5adf130a328eeadd21da34d8?renderMode=0&uiState=661ffd8b80129960ba146657

It was design to be printed upside down. I would such using "Infill Combination" to make it more solid. I would also suggest an infil like "Adaptive Cubic" to both save on time and filament and to help make it stronger overall.

Also, you might want to increase the number of bottom layers to reduce the "Drum" effect it can otherwise develop from having a thin bottom/top layer.