The Best Elegoo Neptune 3/4 Webcam Mount

I didn't want to mount my webcam to the base of the printer because you wont be able to see the print head on large priints so i decided to mount it to the x axis bar. Now you will see the print head no matter what the height. the mount screws on to the bracket through the crescent shaped hole. Do not unscrew you bogie wheel and bolt it to that. Just mount it to the bracket.
This webcam mount attaches to the X axis bar using 2 4mm x 16mm screws and nuts. Make sure it is not rubbing against the wheel behind it. to join it to the 2 arms you need a 6mm x 70mm bolt and nut and a 6mm x 30mm bolt and nut. M6 hex bolt nut handles make it easier to adjust the tension. you can turn the 2 arms upside down if that gives you a better position for your webcam