Shohei Ohtani Dodgers (HueForge)

Bambu Lab users: a Bambu Studio print profile can be downloaded from my cross-post to MakerWorld at https://makerworld.com/en/models/1574307-shohei-ohtani-dodgers-hueforge

I created this model using HueForge (https://shop.thehueforge.com) which is a "filament painting" application that generates 3D models from images. Source image is from https://twitter.com/MLB/status/1734395479809544695. I sliced the model using Cura 5.7.0 for Mac, and relevant settings were as follows:

• Infill 100%
• Layer height 0.08 mm
• Base layer 0.16mm
• Layer 1: started with black filament
• Layer 5: changed to dark blue filament
• Layer 9: changed to light blue filament
• Layer 14: changed to white filament

My Cura slicer had no issues with 126 MB model that came straight out of HueForge, so that is the one that I used for my print. I also provided a simplified 13 MB version in case helpful. Your results may vary based on the specific kind of filaments that you use and the transmission distance properties (read more about it on the HueForge website if interested) of each filament.

If you resize the model, and you want to try to get the same look using the same filaments that I've described above, make sure to resize only the X and Y dimensions and leave the Z height as is. Of course, there is no single “correct” way to print this model. Have fun experimenting with different filament colors and layer changes.