3DS Stands (for Kid Icarus Uprising) (2 Variants)

Two simple stands designed to mimic the accessory that originally came with Kid Icarus Uprising. There's one designed for the original 3DS (original stand's specs) and one edited for the New 3DS XL.

There are flat spots on the bottom of the stand for potentially applying non-slip stickers/tape. I didn't get around to purchasing ones from Amazon to test the design with bonus stickers, so I've included the .f3d files for you to make edits in case the stickers you buy don't fit the models.

The width of the front/back feet is 20mm on the standard 3DS and 25mm on the N3DSXL ones.

The stand may not come with small grip pads (like on the front leg and stand face), but it does have a small lip on the front of the ledge that helps keep the 3DS in place.

You can also use the .f3d files to adjust the height of the ledge. For me, the original stand offers a pretty good balance between hand/table support and thumb freedom of movement. (I thought about including several different height variants, but I decided against it since it'd all be pretty arbitrary and untestable)

Measurements:

-Normal - 72mm extrude, 140mm front length

-New 3DS XL - 95mm extrude, 155mm front length