Infield Engineering Curtiss P-40C Spinner and Detail Parts

These parts fit the 60" radio controlled Curtiss P-40C model of my design.
This model was released as a free digital plan in the TBD 2024 issue of Model Aviation magazine.

The spinner is a 3-piece assembly, including cone, backing plate, and spacer. The nose cone snaps into the backing plate. The OD is 92mm. The length is 84mm. This spinner works well with an FMS 4528-650kV motor.

Also included is an Instrument Panel and a pair of Exhaust Stacks for the early P-40A thru -C variants.

Follow the AMA Safety Code when using this part! Propellers and spinners that rotate at high speed are inherently dangerous. Use extreme care in fabricating and using this part. Use at your own risk!