K8200 anti-vibration Foot

Inspired by this part:
http://www.thingiverse.com/thing:198015

till now the thing was not used but it printed well (for a relativ fast Print)

Damping-foot for a K8200-3D-Printer or other 3D-Printer with 40mm foot-diamter. Also for other Applications where a decoupling of vibrations are required. (for other applications a adapter-thing could be conceivable)

The specific spring-damping-characteristik is not given, but you can change it by inject the "stiffness-creator" part. Its also possible to take your own stiffness-creator, which shold have a wide of 9.5mm and high about 10mm or you inject a small piece of viscoelastic material.

The Functionality of the "stiffnesscreator" part is actual a coupling of the upper 4-way-spring-mechanism with the lower-leaf-spring, which should give more spring-stiffness if needed.