AR Wall Mount Improved

AR Wall Mount - Single Mag
---Horizontal---

"The Minuteman"

Features:

• Single Mag Holder
• Gear Hook. Belts, Bag, Mag Carrier etc
• 1/4" Cable Lock Hole
• Ambi Magwell Mounting - both ways
• Notch for mag catch has a built in Print Supports on both sides (No bed supports needed)

Improvements that make this one different:

• Layer Sticks to prevent snapping on layer lines. (Allows for a little lighter infill and walls but increases strength and durability)
• Beefy Design

Needed:
3 Drywall Screws
2 General purpose wood screws, sized appropriately for hook.

Post Processing:

• Depending on your printer flow and accuracy, you will need to sand the sticks until they can be inserted about an inch or more easily. Then nail them in with a hammer. You only get one chance. No glue needed. If you get stuck, a heat gun is your friend.

Enjoy