Miniature Paint Racks

These are designed to mount on 1/4" hole pegboard with a 1" hole spacing similar to what you can buy at the hardware store, though they work with 3/16" holes with some effort. The design intent is to print without supports and have reasonably low material usage.

What Rack Fits What?

• 17ml-rack
  • Vallejo, Scale75, AK Interactive, Reaper, and similar dropper bottles
• 20ml-rack
  • Turbo Dork
  • Anything in the 17ml rack, though they won't sit as snug
• 59ml-rack
  • 59ml pots from Golden SoFlat range
  • 59ml bottles from Liquitex Acrylic Gouache range
  • 23ml pots from Tamiya
• citadel-rack
  • Citadel pots, because they have to be special apparently
• daler-rowney-rack
  • FW ink bottles from Daler Rowney
• metal-color-rack
  • Vallejo Metal Color
  • Vallejo and AK pigment/enamel wash pots
  • Liquitex inks
  • Dirty Down weathering effects
  • Green Stuff World pots and large bottles
• proacryl-rack
  • Monument Hobbies ProAcryl 22ml bottles

Printing and Assembly

Print one rack with two copies of the peg. The pegs hook through the back of the rack as pictured and then into the pegboard. Optionally, you can glue the pegs in place if you want them to fit more securely (I did not for any pictured racks). Some racks were provided with multiple holes in the back for a few options when placing on the pegboard in case you're going past the edge of the board.

Updates

• 2025-09-06: Per request, added peg--long which gives roughly 2mm extra depth consideration for thicker peg boards. Note that the slightly extended length of the peg may cause issues inserting into various racks, so I advise you to only use this if absolutely necessary.