Dedica 885 685 Abtropfschale, Drip Tray

When using a scale with the Delonghi Dedicas, space is surely an issue. The scale might fit with smaller Espresso-Cups, but not with my filtercoffe-cup. Handling is a pain in the... also.

There are some solutions out there which increase the width of the base, but thats not helping if you are using a scale.
I meassured the original Delonghi Base and created a smaller version of it. It gives you more space for handling, but not a lot. If you want to increase space even more, you would have to cut parts on the machine or have a morge complex design.

The print you see in the pictures is made of Sunlu PLA+. I did a few iterations till i found a good fit. I wanted to print it in ABS, PETG or so afterwards, but never did that somehow. The top sheet is only warped because of my Espresso-routine.
I start the maschine, and then I let 140ml hot water run through the portafilter (to heat it up) into the milk can can (steel). That warpes the PLA sheet a bit.But you can bend it back again... For the drip tray you can use PLA, there is no severe warping on it.

Print on Bambu
0,2 mm Layerheigt, Sunlu PLA+, 4-6 Layers Wallthickness as always.
Feel free to improve the design

If you are super happy with what i provide for free, it would be super nice if you would leave me a tip. On the road to a working product I go through quite some material. It would just help me out a bit.
Falls dir meine Konstruktion hilft und du damit zufrieden bist, wäre ich sehr dankbar für ein kleines Trinkgeld.Beim Erstellen einer funktionierenden Konstruktionen geht auch einiges an Material drauf.