Angle Slider Fidget Toy

Ive designed my own version of a classic fidget toy. This is a slider toy. It has a simple bearing in one corner that lets it rotate in a circular pattern. This version also includes a track with a stop to give it a nice clack when it comes together.

The pictures include some variations on the print surface. If you use a 2 tone filament and select one of the top and bottom print surface patterns. You can get this kind of effect. I used a green and blue silk pla filament for these samples.

They are easy to print and assemble. Once again I am using 6x3mm magnets. The magets on the bottom half are very reassessed to limit the magnetic forces.

You will have to adjust the flow and tuning of your printer to make sure the surfaces come out smooth. I put a fillet on the bottom layer to help with elephants foot.

Also, I have opened up an Etsy shop to sell prints of my models. If you like my models be sure to visit my shop and maybe purchase a couple. I should be adding this model to my listings in the coming days. There will be other colors available.

https://www.etsy.com/shop/3DDotDragon

Like always this was made in Onshape.
https://cad.onshape.com/documents/9bde184654e591fd03e8c4c8/w/c9cb9736f5e046e272d3fd8c/e/a36f289d4d9b15af8ade2b35?renderMode=0&uiState=6667bee46cda39316474d934