June 20, 2024
Description
This model was originally designed to hold a TriFlow Road+ CNC high pressure pump on the bicycle seat tube by the bottle bosses.
In the event that bottle bosses are not available provision is made to attach the holder by cable ties that fit through two slots in the holder .
The holder is designed to be a tight fit to prevent the pump jumping out of the holder. However, for additional security provision is made to fit a Velcro strap through a slot in the holder and around the pump body.
Would fit a compatible pump with a body diameter of ~21mm
Dimensions: 26(W) x 30.2(D) x 85 (H) mm
Weight: ~20g
License:
Creative Commons - Attribution - Non-Commercial - Share Alike
1,164
Gen0idea
