Case for 150W electronic load | elektronische Last Gehäuse

This is a case for the 150W electronic load (the one with 4 buttons).

---

Additional Parts:

• 4x M3x5mm inserts
• 4x M3x8mm countersunk screw (don't worry, prototype pic shows other screws)
• 4x M3x16 socket head screw

Printing:

ALL parts need supports e.g. lines for perfect results.

• body: 0,3mm
• top: upside down; 0.2mm
• buttons: marking has to be up; 0,12mm with brim
• button support: 0,12mm with brim

Hold the buttons in place with the help of pliers. Then fasten the screws from the other side.