Sizes: EU
Filament: Recreus 82A, 3Dfils 85A
Use TPU 95A first
Nozzle: preferably 0.6mm, especially with softer filaments
Use the Orca Slicer or BambuStudio 3mf
You migh also download the “gcodes.zip” folder and print the universal gcodes by uploading them on the printer SD card: send them from the printer interface.
220x220 buildplates fit gcodes up to size EU 40, 250x250 buildplates fits all sizes
Bambu Studio / Orca Slicer settings:
Overlap 2 identical models, same settings except infill line direction: a "grid" pattern is made by overlapping 2 perpendicular zigzag patterns.
Global
- layer height: 0.28mm
- line width sparse infill: 1mm
- wall loops: 0
- top shell layers: 0
- bottom shell layers: 0
- sparse infill density: 14%
- Infill pattern: zigzag (rectilinear for Orca Slicer)
- Infill anchor: 1000 (unlimited)
- Max infill anchor: 1000 (unlimited)
- Infill direction: 45° (model 1) - 135° (model 2)
- Detect narrow internal solid infill: no
- Speed sparse infill: 18 mm/s
- Enable support: no
- Reduce infill retraction: no
Cube modifier (256x256x1.1mm around height 1.5mm to make a 3 layers platform):
- Infill density: 60% (model 1) - 0% (model 2)
- Infill pattern: Rectilinear
- Infill direction: 0°
Filament:
- Retraction: 2.4mm
- Wipe: no
- Z hop: 1.2mm, Normal type
- Max volumetric speed: 4.8 mm^3/s
Cura settings:
- place the model diagonally (45°)
- layer height: 0.3mm
- infill line width: 0.9 (or 0.4 with 225% infill flow)
- wall line count: 0
- top layers: 0
- bottom layers: 0
- initial bottom layers: 0
- infill line distance: 6mm
- infill pattern: grid
- connect infill lines: yes
- infill line direction: []
- randomize infill start: yes
- infill overlap: 0mm
- infill speed: 18mm/s
- combing mode: off
- z hop: 1.2mm
settings modifier (300x300x1.1mm solid, placed around Z = 1.4mm, to make an internal flat top 3 layers platform to place the feet)
- infill pattern: zigzag
- infill line distance: 1mm
- infill line direction: [0,90]
Website: https://riverfamily.art/
RiverFamily
