Stratocaster guitar neck SHIMS

Precision Stratocaster neck SHIMS. Different angles from 0.10 to 1.00 degree. The angles are very precise. Created with both positive (raises the neck/strings) and negative (lowers the neck/strings) versions.

The 0.10 deg shim is thinner than the others and can be used by itself or stacked on one of the others.

I used both PLA and PETG when printing with no difference in quality but I prefer PETG because is it less brittle and more flexible.

I use 0.08 layer thickness for a very smooth slope with 0.20 initial layer thickness. You can use thicker layers and then sand if necessary.

This can probably be used for other guitars and can be sanded/cut easily, especially if using PETG.