Cross RC NT4 Unimog interior

Update April 25th, 2025:
I will see it as a compliment to find my design offered on Aliexpress. However, my intention of sharing this for free is not so someone else can make money of it, as stated in the sharing conditions of thingiverse. Please respect this way of sharing and do not commercialize it. For someone without a 3D printer, it is however a way to obtain the interior for a reasonable price. I have no connection to the seller on Aliexpress.

I want to share my Cross RC NT4 Unimog interior with you all. I made this in not a too long timespan, so it looks great to me, but not everything is exactly to scale. The large stl file Unimog_Cabin_asm is to show where all the parts go.

I removed all the mounting holes in the parts for screwing the NT4 cabin on to make sure you can drill them yourself in the correct location. The entire interior is assembled including the seatbelts and then placed inside the cabin. Use the screws of the original mirror mounts and grab handle on the hood. Same applies for the bodymounts using the original grill. At the back of the cabin you can also place two screws wherever you want to. You can use the original shiny mirrors. The mirror holders and shift levers can be bend from 1.5mm wire.

The rear cabin mounts are glued to the underside of the interior and the counterparts are screwed on the fuel tanks. I used 15x2.5mm magnets purchased from our Chinese friends.

The benches in the back of the truck are made with 3x7 wood. In the engine compartment I placed an ESS One speaker. However, this can also be used as a 2S battery compartment. The receiver and ESC moved to the left fueltank.