Freewing F22 90mm Raptor, Reinforcement Parts

Hi Pilot;

Here you have two stiffeners for reinforcing the front gear and front part of the fuselage of Freewing F22 Raptor 90mm EDF Jet.

After printing the parts, dry fit them and make sure they wont interfere with the gear mechanism. Then use some 5 min epoxy and glue them in place.

For the nose gear stiffener, depending to your print setting you may print the groove little tight for the gear shaft, use deburring tool or your hobby knife to remove the elephant effect edges and smoothen it, the size if fit to the shaft with no play.

Here is the demo video:

https://youtu.be/Z0xuHXCS8wg

Have fun