Empower your laser projects with our versatile, open-source manual power switching system. Designed specifically for hobbyists and DIY scientists, this compact solution streamlines your electronics setup.
##Key Features:
- Independent Control: Toggle each module on/off individually with dedicated manual switches.
- Staggered Start-Up: Sequentially activates modules to accommodate high start-up currents and prevent power-up failures.
- Series Connection: Streamline wiring by connecting modules in series with dual power cables.
- Single Power Supply: Power all modules from a single source for a simplified setup.
- DIY-Friendly: Easy to assemble with basic soldering skills and readily available components.
- Expandable Design: Daisy-chain multiple systems together – there's no limit to how many modules you can control!
##Perfect for:
- LIBRE-hub laser module users: Expand and enhance your laser projects.
- DIY Experimenters: Use laser technology safely and affordably.
- Makers & Tinkerers: Build custom laser tools and gadgets for fun and learning.
##Get Started:
All the information you need is right here!
- Assembly & Wiring Instructions: The only component is a 3-pin manual switch with the following connections:
- Pin 1 is soldered to the V+ line, that comes from the previous switch and goes to the next, providing a continuous path for power through the daisy chain.
- Pin 2 is soldered to the laser V+ and acts as the switch control, connecting to pin 1 when closed, thus powering the laser module.
- Pin 3 is soldered to the laser module's GND, completing the circuit for the laser when the switch is closed, and Pin 3 is also soldered to the GND line, that comes from the previous switch and goes to the next.
- The switch toggles whether the laser module is connected between V+ and GND (on) or between GND and GND (off).
- Daisy Chaining:
- This design allows for easy expansion. By connecting the OUT pin of one component to the V+ pin of the next, you create a daisy chain. This means you can control multiple laser modules independently with a single power supply. Each module has its own switch, so you can turn them on and off individually as needed.
- Components used in the picture:
- Connection cables 1: 2P Male 10pcs, USD$3
- Connection cables 2: 100mm long, 10 pairs, USD$2
- Manual switches: MTS-102-F1, USD$4]
This product was designed by Vicente Parot as a part of the LIBRE hub project.
You can make your own version in our free CAD software
Note: While this system provides basic electronics organization, always handle lasers with caution and follow safety guidelines.
LIBRE-hub
