Sea of Thieves Collector's Chest

Finally a SOT chest in easy filament printable design!
CAD files included so you can add your own variation.

Designed for filament printability:

-Smooth flat bottom for strong buildplate adhesion
-Limited overhangs wherever possible to 60 degrees
-Solid, watertight model without errors
-Does NOT open
-NO booty inside :-(

Recommended Slicer settings:

-2 walls/shells, Inside to Outside
-Z Seam: Sharpest corner, Hide
-4 Top layers, 3 Bottom
-Travel: Not On Outer Surface
-Concentric top/bottom layer pattern
-Infill: 15%, Grid Pattern, Gradual infill steps = 2, Gradual infill step height = 5mm
-Infill: Skin Edge Support Layers = 2
-Experimental (At least in Cura): Make Overhangs Printable, Maximum Model Angle = 60 degrees

Scaling larger should not be a problem as it's 1 piece