This is a wall display for 8 HotWheels/Majorette/Matchbox or any 1:64 cars.
The screw holes are hidden behind the cars (assembly mistake on main the picture).
It's possible to join boxes together vertically or horizontally, or both. The cylinders allows to keep a perfect alignement of the boxes.

Dimensions:

• Car spaces 90mm x 40mm wide x 40mm deep
• Overall dimensions 200mm high x 200mm wide x 45mm deep

With a full wall of boxes, all sections will be 10mm wide (expect the extreme ones of course). This will ensure a perfect look of your assembly.

How-to

You can join boxes with the small cylinders, and it's not mandatory to use glue.
Pay attention to the whole position, they are designed to be displayed behind a car, not at the top. Dis-assemble and rotate 180 degrees the re-assemble if required.
Print as many boxes as you want, and adjust the number of required cylinders.

Quality first

• Optimized for 0.4mm nozzle and 0.2mm layer height.
• Easy to print.
• No support needed.
• Compatible with classic printers like Ender 3.

Buy me a drink!

If you would like to send me a tip to support my creations, click on the link: https://ko-fi.com/espelir Your donations are highly appreciated and will be used to build new prototypes, and buy coffee for difficult mornings with Fusion360.

Kind regards from France!