Summary

Original Corner Spacer part was too low height to be touching the raiser bottom, therefore it was tillting when tightening the screw. Also the hole for the 4mm hot-insert was two large so I made it 3.9mm in diameter. Now insert gets tight and the spacer touches the bottom of the riser when the screw is tightened - holds perfectly.

If you found my design useful or inspiring and would like to buy me a cup of espresso you are welcome to tip me:

https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=U25V96GZNVL3N&source=url

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>K1</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.24 mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>45%</p></div></p>                                                    <strong>Filament:</strong> Creality  hyper PLA                white                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>4 shells (so that there is enough mass of plastic for the hot-inster)</p></div>

Post-Printing

hot insert inserting

            <div><p>I put a screw from above and hot insert from below and screw in a few turns<br>then with hot soldering iron push the hot insert up. The screw protruding on the top shows if itis going in straight ( can correct with the soldering iron if necessary).</p></div>

Corner Spacer for Creality K1 Max Raiser ( thing:6450521 )

Corner Spacer for Creality K1 Max Raiser ( thing:6450521 )

Related Models