Halloween Skellington Pumpkin 2025 UPDATE- SEREV3d

The Jack Skellington Pumpkin 2025 edition is finally here!

If you want ALL the versions, you can go grab them all for FREE on our patreon page

We reworked the inside structure completely:

• ✅ The big lantern Prints in under 8 hours (compared to +11 hours of the 2024 edition!)

• ✅ No supports needed anymore - faster, cleaner, and more ecological 🌍

• ✅ Same iconic spooky look you loved last year, now optimized for everyone’s printer. (ALSO FITS the A1 Mini perfectly!)

And that’s not all, this year’s release comes with extra versions:
⭐ Big lantern size ~8hours
⭐ Tealight version ~1h40m
⭐ Candy bucket ~9h total, small version ~5h
⭐ Keychain version 30minutes
⭐ Magnet version30minutes
⭐ Ultra-tiny Skellington pumpkin ~15minutes, sized perfectly to fit in the hands of the Serev3D Ghosts!

Go grab these extra versions for free on our Patreon: https://www.patreon.com/posts/137905126

• For commercial license and the rights to sell the 3d prints of our designs, become a paid member on our patreon

What filament to use for the Jack Skellington Pumpkin? We recommend:
▶Bambu PLA Basic White

OR

▶Bambu PLA Basic Black

OR (if you want to make it pretty and shiny)

▶Bambu DualSilk PLA

Printer:

► Bambu P1S

Painting recommendation if you use the white filament:
Base Coat: After sanding (optional), leave the filament as is for a base color or lightly prime it with a translucent coat.
Shading: Use black and brown acrylic paints for dry brushing around the eye sockets, mouth, and crevices to enhance depth.
Sealing: Apply a matte clear coat to maintain a natural, weathered look.

Painting recommendation if you use the black filament:
Lightly sand the 3D print to smooth any rough areas (optional).
White Paint Dabbing: Use a sponge with white acrylic paint. Dab lightly on the surface, focusing on raised areas. This will leave the crevices black for natural shading.
Layering: Gradually build up layers of white by repeating the dabbing, letting each layer dry between coats to control the brightness. Finishing Touch: Seal with a matte clear coat to protect the surface and maintain the organic look.

What kind of lights to use for the lantern?

▶Remote Controlled 16-color RGBW Puck Lights

OR
▶D37.2x36.6mm LED Flame Tea Light Candle Set

Check out our Patreon exclusive designs too, we have a lot more awesome things to print:

🔹 Join SEREV3D on Patreon & unlock everything!

We are looking forward to see your prints, Show us your finished results in the comments!