BEYBLADE X -CUSTOM- DUAL SPIN WINDER LAUNCHER

This Launcher has not yet been tested with real Beyblades, only with 3D-printed Beyblades, and it works.

All Beyblade generations are supported (Except Beyblade G-Revolution)

You need m2 screws or bolts

It has almost the same mechanism as the original Winder Launcher.

Beybattle Pass / Beylogger is not supported

This is the Ripcord reference.
You can download: (Thanks to UltraElexiel) https://www.thingiverse.com/thing:6587116

Beyblade X Grip.
You can download Grip: (Thanks to Sαz) https://makerworld.com/en/models/210671

Print Info:

Lock Small Teeth:
The part that is placed inside the starter part where the beyblade is attached. the two-toothed one is for metal fight, burst & classic, the three-toothed one is for X. the only difference with the other version is that the teeth are smaller. functionally tested, but the big version may work better

Lock Large Teeth:
The part that is placed inside the starter part where the beyblade is attached. the two-toothed one is for metal fight, burst & classic, the three-toothed one is for X. the only difference with the other version is that the teeth are bigger. not tested functionally, but I think it could work better

Alternative Starters:
The piece that holds the Beyblade, the Burst and Classic starters are quite sturdy if you print them horizontally, as I placed them due to their design. But unfortunately in "Metal Fight" and especially in the "X" version, the layers separate, even though the small teeth in the metal do not separate, they crack in the middle when printed horizontally (I haven't tried it with 100% filling, maybe it will work) so you can use this alternative piece. If you cut a cover with the dimensions I showed in the images and fix it in the middle of the piece with a screw, it will be quite sturdy...