SIKAI Macropad Stand

This is a remix of Adafruit MACROPAD RP2040 by nmsr1196 .

This modification is intended to hold generic macrpads sold on amazon and ali Express.
Example amazon items are ASIN B0BQGL45KC and B0B7B4MP29
They are 130.5mm and 104.5mm respectively.

These are programmed with SIKAI keypad programming software. Pictures will be added shortly.
there are even recesses added in to account for the screw heads on the bottom side of the keypads. Don't do as I did, wait to install the feet on the stand if you never plan to use the keypad laying flat. I had additional rubber feet to put on the angled stands afterward.

The macro pads that these are modeled for are available as of September 2024 from the links below:

12 key, 2 knob
https://www.amazon.com/dp/B0BQGL45KC?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

6 key. 1 knob
https://www.amazon.com/dp/B0B7B4MP29?ref=ppx_yo2ov_dt_b_fed_asin_title

Customizable keys
https://www.amazon.com/dp/B01M023NFK?ref=ppx_yo2ov_dt_b_fed_asin_title

Attached is fill-able copy of the X-keys Template. I am not sure why they didn't add text boxes to the PDF. I have added a single text box per key. I am working on one with 2 text boxes per key. This will allow you to write the command in an upper box and the actually key press that is being pushed in the lower portion. As seen in the example picture.