Summary

台灣的水龍頭好像都是用12mm螺帽固定, 至少我們用過的 Falali (法拉利) 跟 HCG (和成) 都是用 12mm 長螺帽, Falali 的螺絲稍微長了一點, 如果模型不夠長, 可以用切片軟體拉長. 感謝 "Idea 創意應用科技有限公司" (https://www.facebook.com/idearobot) 幫忙列印.

Need to replace the Kitchen faucet, but don't have a deep socket wrench in Taiwan. Thanks to my friend at https://www.facebook.com/idearobot, they helped me printing out the wrench with 2 different orientations and they seem both work fine, at least for one time use. I would still print it out with the horizontal orientation, as the screenshot.

Print Settings

Rafts:

Doesn't Matter

                                            <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>100% or high</p></div></p>                                                    <strong>Filament:</strong> NA PLA+                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>橫著印或直的印好像都可以,  但我還是覺得橫著印比較好</p><p>Position it on the print bed with the flat / cut off of the socket. Support print bed only to the lever and block the support on the socket body. Also if the socket length is not long enough, the slicer can be used to scale it out.</p></div>

12mm socket wrench for kitchen faucet (廚房水龍頭板手)

12mm socket wrench for kitchen faucet (廚房水龍頭板手)

Related Models