Deadpool Wolverine Fused Figure

Inspired by the new Deadpool Wolverine movie, we made an awesome little figurine where we fused the two of them together!
This is the FREE single color full piece version of Deadpool-Wolverine:)
You can get the multicolor AMS, multi piece, and a bunch of different versions on our Serev3d webshop: https://serev3d.com/shop/

Check out all our latest exclusive designs on our Patreon: https://www.patreon.com/SEREV3d

• For getting the rights to sell the 3d prints of our designs, become a paid member on our patreon: https://www.patreon.com/SEREV3d

▶ ▶Join our Serev3D Authorized Sellers List

Recommended painting steps:

1.Spray with plastic primer.
2.Base Colors: Paint large areas -red and black for Deadpool, yellow and dark blue for Wolverine).

3.Details: Use small brushes for eyes, belt logo, and the black stitches.

4.Washes: Apply thin dark washes for shadows.

5.Dry Brush: Lightly brush lighter colors on raised details.

6.Seal: Apply a clear sealant to protect the paint.

PRINT info and advice:
If you use the print profile we provided the manual tree supports are already set up and added on the file as well as all the recommended settings, with Bambu Slicer it's all fully ready to print!
The easiest way to remove supports: we recommend to use a thin pliers, blade/knife to cut out/remove the supports.

*Suitable for FDM and resin printing too (in resin the textured surface details will definitely show better.)
(You can use automatic tree supports for this print, make sure to have the Top Z distance in between 0.28-0.3, and the Bottom Z distance around 0.2 to be able to remove supports more easily.

-Be careful at the parts of the claws, since it's a thin part of the print it's better use a blade/knife to carefully remove the supports from those parts.)

▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️▪️▫️

Check out our Patreon exclusive designs too, we have a lot more awesome things to print:

🔹 Join SEREV3D on Patreon & unlock everything!